Table 87 Log Viewer > Critical Logs - ZyXEL Communications VANTAGE REPORT - VERSION 2.3 User Manual

The fields in the first three rows (and Search and Reset) appear when you open the
report. The fields in the next three rows (above Search and Reset) appear if you do not
select All Categories in the Category field and if you select Advanced Search. The
table of log entries appears after you click Search, even if there are no log entries for
your search criteria.
Table 87 Log Viewer > Critical Logs
LABEL
Day
Start Time
End Time
Days
Start Date
End Date
Category
Advanced Search
Source IP
Destination IP
Keyword
Search
Reset
Time
Source:Port
Destination:Port
Category
Message
Total Count
Total Page
First .. Last
Go
Chapter 9 Log Viewer
Each field is described in the following table.
DESCRIPTION
Select this if you want to look at log entries from one day or part of one day.
Enter the time of the earliest log entries you want to see, if you select Day.
Enter the time of the latest log entries you want to see, if you select Day.
Select this if you want to look at log entries from more than one day.
This field is enabled and required if you select Days. Enter the date of the
earliest log entries you want to see. You can also click the Calendar icon to
specify the date.
This field is enabled and required if you select Days. Enter the date of the latest
log entries you want to see. You cannot enter a date earlier than Start Date. You
can also click the Calendar icon to specify the date.
This field depends on the model of the selected ZyXEL device. Select what type
of log entries you want to see. You can also select All Categories.
This field is disabled if Category is All Categories. Select this if you want to use
other search criteria to look at log entries.
Enter the source IP address in the event that generated the log entry.
Enter the destination IP address in the event that generated the log entry.
Enter part or all of any value you want to look for in the Message field. You can
use any printable ASCII character. The search is not case-sensitive.
Click this to display the log entries based on the current search criteria.
Click this to set the search criteria to the values they had the last time you
clicked Search. If you have not clicked Search yet, the search criteria return to
their default values.
This field displays the time the Vantage Report server received the log entry, not
the time the log entry was generated.
This field displays the source IP address and port (if any) of the event that
generated the entry.
This field displays the destination IP address and port (if any) of the event that
generated the entry.
This field displays the type of log entry.
This field displays the reason the log entry was generated.
This field displays how many log entries there are for the specified search
criteria.
This field displays how many screens it takes to display all the log entries.
Click First, Last, or a specific page number to look at the records on that page.
Some choices are not available, depending on the number of pages.s
Enter the page number you want to see, and click Go.
Vantage Report User's Guide
192