Figure 13 Report Window Right-Click Menu - ZyXEL Communications VANTAGE REPORT - VERSION 2.3 User Manual

Vantage Report User's Guide
Table 8 Typical Statistical Report Features
SECTION
3
4
5
6
7
You can also right-click on statistical reports. In some places, you see the standard browser
menu. In other places (especially on graphs), the following menu appears.

Figure 13 Report Window Right-Click Menu

Click Settings... if you want to change the Flash settings on the Vantage Report server. In
most cases, this is unnecessary. Click About Macromedia Flash Player 7... to get
information about the current version of Flash.
43
DESCRIPTION
This field shows the menu items you selected to open this statistical report.
This field displays the title of the statistical report. The title includes the date(s) you
specified in section 5.
Last Days, Settings: Use one of these fields to specify what historical information is
included in the report.
• Select how many days, ending (and including) today, in the Last Days drop-down list.
• Click Settings, and select a specific Start Date and End Date. The date range can be
up to 30 days long, but you cannot include days that are older than Store Log Days in
System > General Configuration. See
When you change any of these fields, the report updates automatically. The Last Days
field returns to zero, regardless of your selection. This way, you can refresh the report by
selecting Last Days again. You can see the current date range in the title (section 4).
Both the Last Days and Settings fields reset to the default values when you click a menu
item in the function window (including the menu item for the same report). They do not
reset when you open or close drill-down reports.
These fields are not available in drill-down reports because these reports use the same
historical information as the main report.
See section 2.3 on page 27
The graph displays the specified report visually.
• Select PIE chart or BAR chart in the drop-down list box. You can specify the Default
Chart Type in System > General Configuration. See
• Move your mouse over a slice in the pie chart or a bar in the bar chart. The yellow
conversation box identifies the slice or bar.
• Click on a slice in the pie chart to move it away from the pie chart a little.
See section 2.4 on page 28
statistical report.
In the table,
• Click on a link to drill down into the report. The current report is replaced by a detailed
report for the selected record. The detailed report uses the same historical information
you select in #5.
• If DNS Reverse is enabled in System > General Configuration, the table displays
the domain name, if identifiable, with IP addresses (for example, "www.yahoo.com/
200.100.20.10"). See section 11.1 on page
• Some reports provide extra information (for example, number of traffic events) in the
table. See each report for more information.
See section 2.4 on page 28
statistical report.
section 11.1 on page
for more information about time in these screens.
for more information about the source data used by the
202.
for more information about the source data used by the
Chapter 3 The Web Configurator
202.
section 11.1 on page 202.