ZyXEL Communications P-660HNT1 User Manual page 36

Chapter 3 Status Screens
Each field is described in the following table.
Table 4 Status Screen
LABEL
Refresh Interval Select how often you want the ZyXEL Device to update this screen.
Apply
Device Information
Host Name
Model
Number
MAC
Address
ZyNOS
Firmware
Version
DSL
Firmware
Version
WAN Information
DSL Mode
IP Address
IP Subnet
Mask
Default
Gateway
VPI/VCI
LAN Information
IP Address
IP Subnet
Mask
DHCP
WLAN Information
ESSID
36
DESCRIPTION
Click this to update this screen immediately.
This field displays the ZyXEL Device system name. It is used for
identification.
This is the model name of your device.
This is the MAC (Media Access Control) or Ethernet address unique to
your ZyXEL Device.
This is the current version of the firmware inside the device. Click this
to go to the screen where you can change it.
This is the current version of the device's DSL modem code.
This is the DSL standard that your ZyXEL Device is using.
This is the current IP address of the ZyXEL Device in the WAN. Click this
to go to the screen where you can change it.
This is the current subnet mask in the WAN.
This is the IP address of the default gateway, if applicable.
This is the Virtual Path Identifier and Virtual Channel Identifier that you
entered in the wizard or WAN screen.
This is the current IP address of the ZyXEL Device in the LAN. Click this
to go to the screen where you can change it.
This is the current subnet mask in the LAN.
This field displays what DHCP services the ZyXEL Device is providing to
the LAN. Choices are:
Server - The ZyXEL Device is a DHCP server in the LAN. It assigns IP
addresses to other computers in the LAN.
Relay - The ZyXEL Device acts as a surrogate DHCP server and relays
DHCP requests and responses between the remote server and the
clients.
None - The ZyXEL Device is not providing any DHCP services to the
LAN.
Click this to go to the screen where you can change it.
This is the descriptive name used to identify the ZyXEL Device in a
wireless LAN. Click this to go to the screen where you can change it.
P-660HN-TxA User's Guide