ZyXEL Communications P-660HNT1 User Manual page 37

Table 4 Status Screen
LABEL
Channel
Security
WPS
Status
Security
Firewall
System Status
System
Uptime
Current
Date/Time
System
Mode
CPU Usage
Memory
Usage
Interface Status
Interface
P-660HN-TxA User's Guide
DESCRIPTION
This is the channel number used by the ZyXEL Device now.
This displays the type of security mode the ZyXEL Device is using in the
wireless LAN.
This displays whether WPS is activated. Click this to go to the screen
where you can configure the settings.
This displays whether WLAN is activated.
This displays whether or not the ZyXEL Device's firewall is activated.
Click this to go to the screen where you can change it.
This field displays how long the ZyXEL Device has been running since it
last started up. The ZyXEL Device starts up when you plug it in, when
you restart it (Maintenance > Tools > Restart), or when you reset it.
This field displays the current date and time in the ZyXEL Device. You
can change this in Maintenance > System > Time Setting.
This displays whether the ZyXEL Device is functioning as a router or a
bridge.
This field displays what percentage of the ZyXEL Device's processing
ability is currently used. When this percentage is close to 100%, the
ZyXEL Device is running at full load, and the throughput is not going to
improve anymore. If you want some applications to have more
throughput, you should turn off other applications (for example, using
QoS; see Chapter 14 on page
This field displays what percentage of the ZyXEL Device's memory is
currently used. Usually, this percentage should not increase much. If
memory usage does get close to 100%, the ZyXEL Device is probably
becoming unstable, and you should restart the device. See
on page 227, or turn off the device (unplug the power) for a few
seconds.
This column displays each interface the ZyXEL Device has.
Chapter 3 Status Screens
171).
Section 21.4
37