ZyXEL Communications P-660HNT1 User Manual page 225

Restore Configuration
Restore Configuration allows you to upload a new or previously saved
configuration file from your computer to your ZyXEL Device.
Table 91 Restore Configuration
LABEL
File Path
Browse...
Upload
Do not turn off the ZyXEL Device while configuration file upload is
in progress.
After you see a "restore configuration successful" screen, you must then wait one
minute before logging into the ZyXEL Device again.
Figure 107 Configuration Upload Successful
The ZyXEL Device automatically restarts in this time causing a temporary network
disconnect. In some operating systems, you may see the following icon on your
desktop.
Figure 108 Network Temporarily Disconnected
If you uploaded the default configuration file you may need to change the IP
address of your computer to be in the same subnet as that of the default device IP
address (192.168.1.1). See
your computer's IP address.
P-660HN-TxA User's Guide
DESCRIPTION
Type in the location of the file you want to upload in this field or click
Browse ... to find it.
Click this to find the file you want to upload. Remember that you must
decompress compressed (.ZIP) files before you can upload them.
Click this to begin the upload process.
Appendix A on page 247
Chapter 21 Tools
for details on how to set up
225