Table 5 IP Settings in this Tutorial
DEVICE / COMPUTER
R's N2
B
To configure a static route to route traffic from N1 to N2:
Log into the ZyXEL Device's Web Configurator in advanced mode.
1
Click Advanced > Static Route.
2
Click Edit on a new rule in the Static Route screen.
3
Configure the Static Route Setup screen using the following settings:
4
Type 192.168.10.0 and subnet mask 255.255.255.0 for the destination,
4a
N2.
Type 192.168.1.253 (R's N1 address) in the Gateway IP Address field.
4b
Click Apply.
4a
Now B should be able to receive traffic from A. You may need to additionally
configure B's firewall settings to allow specific traffic to pass through.
P-660HN-TxA User's Guide
IP ADDRESS
192.168.10.2
192.168.10.33
Chapter 4 Tutorials
51