Starting Otist; Notes On Otist; Figure 37 Security Key; Figure 38 Otist In Progress (Ap) - ZyXEL Communications P-320W User Manual

4.5.2 Starting OTIST

Note: You must click Start in the AP OTIST web configurator screen and in the
wireless client(s) Adapter screen all within three minutes (at the time of
writing). You can start OTIST in the wireless clients and AP in any order but
they must all be within range and have OTIST enabled.
1 In the AP, a web configurator screen pops up showing you the security settings to
transfer. After reviewing the settings, click OK.

Figure 37 Security Key

2 This screen appears while OTIST settings are being transferred. It closes when the
transfer is complete.

Figure 38 OTIST in Progress (AP)

• In the wireless client, you see this screen if it can't find an OTIST-enabled AP (with the
same Setup key). Click OK to go back to the ZyXEL utility main screen.
Figure 40
• If there is more than one OTIST-enabled AP within range, you see a screen asking you to
select one AP to get settings from.

4.5.3 Notes on OTIST

1 If you enabled OTIST in the wireless client, you see this screen each time you start the
utility. Click Yes for it to search for an OTIST-enabled AP.
Chapter 4 Wireless LAN
No AP with OTIST Found
P-320W User's Guide

Figure 39 OTIST in Progress (Client)

75