Pppoe Encapsulation - ZyXEL Communications P-320W User Manual

802.11g wireless firewall router
Hide thumbs Also See for P-320W:
Table of Contents

Advertisement

Table 31 WAN: Ethernet Encapsulation
LABEL
Spoof WAN MAC
Address
Clone MAC
address
Apply
Reset

5.6.2 PPPoE Encapsulation

The Prestige supports PPPoE (Point-to-Point Protocol over Ethernet). PPPoE is an IETF
standard (RFC 2516) specifying how a personal computer (PC) interacts with a broadband
modem (DSL, cable, wireless, etc.) connection. The PPP over Ethernet option is for a dial-
up connection using PPPoE.
For the service provider, PPPoE offers an access and authentication method that works with
existing access control systems (for example RADIUS).
One of the benefits of PPPoE is the ability to let you access one of multiple network services,
a function known as dynamic service selection. This enables the service provider to easily
create and offer new IP services for individuals.
Operationally, PPPoE saves significant effort for both you and the ISP or carrier, as it requires
no specific configuration of the broadband modem at the customer site.
By implementing PPPoE directly on the Prestige (rather than individual computers), the
computers on the LAN do not need PPPoE software installed, since the Prestige does that part
of the task. Furthermore, with NAT, all of the LANs' computers will have access.
The screen shown next is for PPPoE encapsulation.
Chapter 5 WAN
DESCRIPTION
The MAC address section allows users to configure the WAN port's MAC address
by either using the factory default or cloning the MAC address from a computer on
your LAN.
Clear the check box to use the factory assigned default MAC Address.
Select this option and and click Clone MAC to clone the MAC address in the MAC
Address field.
Enter the MAC address of the computer on the LAN whose MAC you are cloning.
Once it is successfully configured, the address will be copied to the rom file
(ZyNOS configuration file). It will not change unless you change the setting or
upload a different ROM file.
Click Apply to save your changes back to the Prestige.
Click Reset to begin configuring this screen afresh.
P-320W User's Guide
85

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents