Figure 61 Security: 802.1X Static 64-Bit, 802.1X Static 128-Bit; Table 29 Security: 802.1X Static 64-Bit, 802.1X Static 128-Bit - ZyXEL Communications NWA-3500 User Manual

Chapter 7 Wireless Security Configuration

Figure 61 Security: 802.1x Static 64-bit, 802.1x Static 128-bit

The following table describes the labels in this screen.

Table 29 Security: 802.1x Static 64-bit, 802.1x Static 128-bit

LABEL
Name
Security Mode
ASCII
Hex
Key 1 to Key 4
ReAuthentication
Timer
Idle Timeout
Apply
Reset
112
DESCRIPTION
Type a name to identify this security profile.
Choose 802.1x Static 64 or 802.1x Static 128 in this field.
Select this option to enter ASCII characters as the WEP keys.
Select this option to enter hexadecimal characters as the WEP keys.The
preceding "0x" is entered automatically.
If you chose 802.1x Static 64, then enter any 5 characters (ASCII string) or 10
hexadecimal characters ("0-9", "A-F") preceded by 0x for each key.
If you chose 802.1x Static 128-bit, then enter 13 characters (ASCII string) or 26
hexadecimal characters ("0-9", "A-F") preceded by 0x for each key.
There are four data encryption keys to secure your data from eavesdropping by
unauthorized wireless users. The values for the keys must be set up exactly the
same on the access points as they are on the wireless stations.
The preceding "0x" is entered automatically. You must configure all four keys, but
only one key can be activated at any one time. The default key is key 1.
Specify how often wireless stations have to resend user names and passwords in
order to stay connected.
Enter a time interval between 10 and 9999 seconds. The default time interval is
1800 seconds (30 minutes). Alternatively, enter "0" to turn reauthentication off.
Note: If wireless station authentication is done using a
RADIUS server, the reauthentication timer on the
RADIUS server has priority.
The ZyXEL Device automatically disconnects a wireless station from the wired
network after a period of inactivity. The wireless station needs to enter the user
name and password again before access to the wired network is allowed.
The default time interval is 3600 seconds (or 1 hour).
Click Apply to save your changes.
Click Reset to begin configuring this screen afresh.
ZyXEL NWA-3500 User's Guide