Rogue Ap List; Figure 84 Rogue Ap > Friendly Ap; Table 44 Rogue Ap > Friendly Ap - ZyXEL Communications NWA-3500 User Manual

Figure 84 ROGUE AP > Friendly AP
The following table describes the labels in this screen.
Table 44 ROGUE AP > Friendly AP
LABEL
Add Friendly AP
MAC Address
Description
Add
Friendly AP List
#
MAC Address
SSID
Channel
Security
Description
Delete

11.3.3 Rogue AP List

This list displays details of all IEEE 802.11a/b/g wireless access points within the ZyXEL
Device's coverage area, except for the ZyXEL Device itself and the access points included in
the friendly AP list (see
You can set how often you want the ZyXEL Device to scan for rogue APs in the ROGUE AP
> Configuration screen (see
Click ROGUE AP > Rogue AP. The following screen displays.
ZyXEL NWA-3500 User's Guide
DESCRIPTION
Use this section to manually add a wireless access point to the list. You
must know the device's MAC address.
Enter the MAC address of the AP you wish to add to the list.
Enter a short, explanatory description identifying the AP with a maximum of
32 alphanumeric characters. Spaces, underscores (_) and dashes (-) are
allowed.
Click this button to include the AP in the list.
This is the list of safe wireless access points you have already configured.
This is the index number of the AP's entry in the list.
This field displays the Media Access Control (MAC) address of the AP. All
wireless devices have a MAC address that uniquely identifies them.
This field displays the Service Set IDentifier (also known as the network
name) of the AP.
This field displays the wireless channel the AP is currently using.
This field displays the type of wireless encryption the AP is currently using.
This is the description you entered when adding the AP to the list.
Click this button to remove an AP's entry from the list.
Section 11.3.2 on page 144).
Section 11.3.1 on page
Chapter 11 Rogue AP
143).
145