Snmp Traps; Table 50 Snmp Traps; Table 51 Snmp Interface Index To Physical And Virtual Port Mapping - ZyXEL Communications NWA-3500 User Manual

802.11a/b/g wireless access point
Hide thumbs Also See for NWA-3500:
Table of Contents

Advertisement

12.5.2 SNMP Traps

The ZyXEL Device can send the following traps to the SNMP manager.

Table 50 SNMP Traps

TRAP NAME
Generic Traps
coldStart
warmStart
linkDown
linkUp
authenticationFailure
(defined in RFC-1215)
Traps defined in the
ZyXEL Private MIB.
whyReboot
pwTFTPStatus
12.6 SNMP Traps
Some traps include an SNMP interface index. The following table maps the SNMP interface
indexes to the ZyXEL Device's physical and virtual ports.

Table 51 SNMP Interface Index to Physical and Virtual Port Mapping

TYPE
Physical
Virtual
ZyXEL NWA-3500 User's Guide
OBJECT IDENTIFIER #
(OID)
1.3.6.1.6.3.1.1.5.1
1.3.6.1.6.3.1.1.5.2
1.3.6.1.6.3.1.1.5.3
1.3.6.1.6.3.1.1.5.4
1.3.6.1.6.3.1.1.5.5
1.3.6.1.4.1.890.1.5.13.0.1 This trap is sent with the reason for restarting
1.3.6.1.4.1.890.1.9.2.3.3.
1
INTERFACE
enet0
enet1
enet2
enet3 ~ enet9
enet10 ~ enet16
enet17 ~ enet21
enet22 ~ enet26
Chapter 12 Remote Management Screens
DESCRIPTION
This trap is sent after booting (power on). This
trap is defined in RFC-1215.
This trap is sent after booting (software
reboot). This trap is defined in RFC-1215.
This trap is sent when the Ethernet link is
down.
This trap is sent when the Ethernet link is up.
The device sends this trap when it receives
any SNMP get or set requirements with the
wrong community (password).
Note: snmpEnableAuthenTraps, OID
1.3.6.1.2.1.11.30 (defined in RFC 1214 and
RFC 1907) must be enabled on in order for
the device to send authenticationFailure traps.
Use a MIB browser to enable or disable
snmpEnableAuthenTraps.
before the system reboots (warm start).
"System reboot by user!" is added for an
intentional reboot (for example, download new
files, CI command "sys reboot").
If the system reboots because of fatal errors, a
code for the error is listed.
This trap is sent to indicate the status and
result of a TFTP client session that has ended.
PORT
Wireless LAN adaptor WLAN1
Ethernet port (LAN)
Wireless LAN adaptor WLAN2
WLAN1 in MBSSID mode
WLAN2 in MBSSID mode
WLAN1 in WDS mode
WLAN2 in WDS mode
153

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents