Figure 200 Configuration File Format; Table 119 Displaying The File Version; Table 120 Displaying The File Version - ZyXEL Communications NWA-3500 User Manual

Table 118 Configuration via SNMP
STEPS
Step 3
Step 4
Verifying Your Configuration File Upload Via SNMP
You can use SNMP management software to display the configuration file version currently
on the device by using the following MIB.

Table 119 Displaying the File Version

ITEM
pwCfgVersion
Troubleshooting Via SNMP
If you have any difficulties with the configuration file upload, you can try using the following
MIB 10 to 20 seconds after using SNMP to have the AP download the configuration file.

Table 120 Displaying the File Version

ITEM
pwTftpOpStatus
Configuration File Format
The text based configuration file must use the following format.

Figure 200 Configuration File Format

!#ZYXEL PROWLAN
!#VERSION 12
wcfg security 1 xxx
wcfg security save
wcfg ssid 1 xxx
wcfg ssid save
The first line must be
The second line must specify the file version. The AP compares the file version with the
version of the last configuration file that it downloaded. If the version of the downloaded file is
the same or smaller (older), the AP ignores the file. If the version of the downloaded file is
larger (newer), the AP uses the file.
Configuration File Rules
You can only use the
other ZyNOS commands but continues to check the next command.
The AP ignores any improperly formatted commands and continues to check the next line.
ZyXEL NWA-3500 User's Guide
MIB VARIABLE
pwTftpFileType
pwTftpOpCommand
OBJECT ID
1.3.6.1.4.1.890.1.9.1.2
OBJECT ID
1.3.6.1.4.1.890.1.9.1.6
!#ZYXEL PROWLAN.
and commands in the configuration file. The AP ignores
wlan wcfg
Appendix H Text File Based Auto Configuration
VALUE
Set to 3 (text configuration file).
Set to 2 (download).
DESCRIPTION
This displays the current configuration file version.
DESCRIPTION
This displays the current operating status of the TFTP
client.
305