Figure 69 Configuring Ssid; Table 36 Configuring Ssid - ZyXEL Communications NWA-3500 User Manual

Chapter 8 MBSSID and SSID
• WIRELESS > Security (one of the security profiles).
• WIRELESS > RADIUS (one of the RADIUS profiles).
• WIRELESS > MAC Filter (the MAC filter list, if activated in the SSID profile).
• WIRELESS > Layer 2 Isolation (the layer 2 isolation list, if activated in the SSID
profile).
• Also, use the VLAN screen to set up wireless VLANs based on SSID.
Configure the fields in the above screens to use the settings in an SSID profile.
Select an SSID profile in the WIRELESS > SSID screen and click Edit to display the
following screen.

Figure 69 Configuring SSID

The following table describes the labels in this screen.

Table 36 Configuring SSID

LABEL
Profile Name
SSID
Hide Name (SSID)
Security
RADIUS
124
DESCRIPTION
Enter a name identifying this profile.
When a wireless client scans for an AP to associate with, this is the name that
is broadcast and seen in the wireless client utility.
Select Disable if you want the ZyXEL Device to broadcast this SSID (a
wireless client scanning for an AP will find this SSID). Alternatively, select
Enable to have the ZyXEL Device hide this SSID (a wireless client scanning
for an AP will not find this SSID).
Select a security profile to use with this SSID profile. See
108 for more information.
Select a RADIUS profile from the drop-down list box, if you have a RADIUS
server configured. If you do not need to use RADIUS authentication, ignore
this field. See Section 7.11 on page 116
Section 7.9 on page
for more information.
ZyXEL NWA-3500 User's Guide