Security: 802.1X Static 64-Bit, 802.1X Static 128-Bit; Figure 59 Security: 802.1X Only; Table 28 Security: 802.1X Only - ZyXEL Communications ZyXEL NWA3550 User Manual

Chapter 8 Wireless Security Configuration

Figure 59 Security: 802.1x Only

The following table describes the labels in this screen.

Table 28 Security: 802.1x Only

LABEL
Profile Name
Security Mode
ReAuthentication
Timer
Idle Timeout
Apply
Reset

8.3.3 Security: 802.1x Static 64-bit, 802.1x Static 128-bit

Select 8021x-Static64 or 8021x-Static128 in the Security Mode field to display the following
screen.
114
DESCRIPTION
Type a name to identify this security profile.
Choose 8021x-Only in this field.
Specify how often wireless stations have to resend user names and passwords in
order to stay connected.
Enter a time interval between 10 and 9999 seconds. The default time interval is
1800 seconds (30 minutes). Alternatively, enter "0" to turn reauthentication off.
Note: If wireless station authentication is done using a RADIUS
server, the reauthentication timer on the RADIUS server has
priority.
The ZyXEL Device automatically disconnects a wireless station from the wired
network after a period of inactivity. The wireless station needs to enter the user
name and password again before access to the wired network is allowed.
The default time interval is 3600 seconds (or 1 hour).
Click Apply to save your changes.
Click Reset to begin configuring this screen afresh.
NWA3550 User's Guide