Troubleshooting; Chapter 12 Troubleshooting; Power, Hardware Connections, And Leds - ZyXEL Communications NWA 1121-NI User Manual

This chapter offers some suggestions to solve problems you might encounter. The potential
problems are divided into the following categories.
•

Power, Hardware Connections, and LEDs

• NWA1121-NI Access and Login
• Internet Access
12.1 Power, Hardware Connections, and LEDs
The NWA1121-NI does not turn on. None of the LEDs turn on.
Make sure you are using the power adaptor or cord included with the NWA1121-NI.
1
Make sure the power adaptor or cord is connected to the NWA1121-NI and plugged in to an
2
appropriate power source. Make sure the power source is turned on.
Disconnect and re-connect the power adaptor or cord to the NWA1121-NI.
3
If the problem continues, contact the vendor.
4
One of the LEDs does not behave as expected.
Make sure you understand the normal behavior of the LED. See
1
Check the hardware connections. See the Quick Start Guide.
2
Inspect your cables for damage. Contact the vendor to replace any damaged cables.
3
Disconnect and re-connect the power adaptor to the NWA1121-NI.
4
If the problem continues, contact the vendor.
5
NWA1121-NI User's Guide
C
HAPTER

Troubleshooting

Section 1.7 on page
1 2
17.
127