ZyXEL Communications NWA 1121-NI User Manual page 84

Chapter 6 Wireless LAN
6.6.4.1 Access Point
Use this screen to employ WPA or WPA2 as the security mode for your NWA1121-NI that is in root
AP, MBSSID or repeater operating mode. Select WPA, WPA2 or WPA2-MIX in the Security Mode
field to display the following screen.
Figure 33 Security: WPA/WPA2 for Access Point
The following table describes the labels in this screen.
Table 21 Security: WPA/WPA2 for Access Point
LABEL
Security Settings
Profile Name
Security Mode
Rekey Options
Reauthentication
Time
Enable Group-Key
Update
Back
Apply
Cancel
84
DESCRIPTION
This is the name that identifying this profile.
Choose WPA, WPA2 or WPA-MIX in this field.
Specify how often wireless stations have to resend user names and passwords in order to
stay connected.
Enter a time interval between 100 and 3600 seconds. Alternatively, enter "0" to turn
reauthentication off.
Note: If wireless station authentication is done using a RADIUS server, the reauthentication
timer on the RADIUS server has priority.
Select this option to have the NWA1121-NI automatically disconnect a wireless station
from the wired network after a period of inactivity. The wireless station needs to enter the
user name and password again before access to the wired network is allowed.
Enter a time interval between 100 and 3600 seconds.
Click Back to return to the previous screen.
Click Apply to save your changes.
Click Cancel to begin configuring this screen afresh.
NWA1121-NI User's Guide