Back To Factory Defaults; Restart Screen - ZyXEL Communications NWA 1121-NI User Manual

The NWA1121-NI automatically restarts in this time causing a temporary network disconnect. In
some operating systems, you may see the following icon on your desktop.
Figure 66 Network Temporarily Disconnected
If you uploaded the default configuration file you may need to change the IP address of your
computer to be in the same subnet as that of the default NWA1121-NI IP address (192.168.1.2).
See Appendix A on page 131

11.8.3 Back to Factory Defaults

Pressing the Reset button in this section clears all user-entered configuration information and
returns the NWA1121-NI to its factory defaults as shown on the screen. The following screen will
appear.
Figure 67 Reset Message
You can also press the RESET button to reset your NWA1121-NI to its factory default settings.
Refer to Section 2.2 on page 20

11.9 Restart Screen

Use this screen to reboot the NWA1121-NI without turning the power off.
Click Maintenance > Restart. The following screen displays.
Figure 68 Maintenance > Restart
NWA1121-NI User's Guide
for details on how to set up your computer's IP address.
for more information.
Chapter 11 Maintenance
125