ZyXEL Communications NWA 1121-NI User Manual page 88

Chapter 6 Wireless LAN
The following table describes the labels in this screen.
Table 24 Wireless LAN > RADIUS
LABEL
Profile Name
Primary RADIUS
Server
Primary Server IP
Address
Primary Server
Port
Primary Share
Secret
Backup RADIUS
Server
Backup Server IP
Address
Backup Server
Port
Backup Share
Secret
Primary Accounting
Server
Primary Server IP
Address
Primary Server
Port
Primary Share
Secret
Backup Accounting
Server
Backup Server IP
Address
Backup Server
Port
Backup Share
Secret
Back
88
DESCRIPTION
This is the name that identifying this RADIUS profile.
Select the check box to enable user authentication through an external authentication
server.
Enter the IP address of the RADIUS server to be used for authentication.
Enter the port number of the RADIUS server to be used for authentication.
Enter a password (up to 64 alphanumeric characters) as the key to be shared
between the external authentication server and the NWA1121-NI. The key must be
the same on the external authentication server and your NWA1121-NI. The key is not
sent over the network.
If the NWA1121-NI cannot communicate with the primary RADIUS server, you can
have the NWA1121-NI use a backup RADIUS server. Make sure the check boxe is
selected if you want to use the backup server.
The NWA1121-NI will attempt to communicate three times before using the backup
server. Requests can be issued from the client interface to use the backup server. The
length of time for each authentication is decided by the wireless client or based on
the configuration of the Reauthentication Time field in the Wireless LAN >
Security screen.
Enter the IP address of the RADIUS server to be used for authentication.
Enter the port number of the RADIUS server to be used for authentication.
Enter a password (up to 64 alphanumeric characters) as the key to be shared
between the external authentication server and the NWA1121-NI. The key must be
the same on the external authentication server and your NWA1121-NI. The key is not
sent over the network.
Select the check box to enable user accounting through an external authentication
server.
Enter the IP address of the external accounting server in dotted decimal notation.
Enter the port number of the external accounting server.
Enter a password (up to 64 alphanumeric characters) as the key to be shared
between the external accounting server and the NWA1121-NI. The key must be the
same on the external accounting server and your NWA1121-NI. The key is not sent
over the network.
If the NWA1121-NI cannot communicate with the primary accounting server, you can
have the NWA1121-NI use a backup accounting server. Make sure the check boxe is
selected if you want to use the backup server.
The NWA1121-NI will attempt to communicate three times before using the backup
server.
Enter the IP address of the external accounting server in dotted decimal notation.
Enter the port number of the external accounting server.
Enter a password (up to 64 alphanumeric characters) as the key to be shared
between the external accounting server and the NWA1121-NI. The key must be the
same on the external accounting and your NWA1121-NI. The key is not sent over the
network.
Click Back to return to the previous screen.
NWA1121-NI User's Guide