ZyXEL Communications NWA 1121-NI User Manual page 78

Chapter 6 Wireless LAN
Table 17 Security: 802.1x Only for Access Point (continued)
LABEL
Reauthentication
Time
Enable Group-Key
Update
Back
Apply
Cancel
6.6.2.2 Wireless Client
Use this screen to use 802.1x-Only security mode for your NWA1121-NI that is in wireless client
operating mode. Select 802.1x-Only in the Security Mode field to display the following screen.
Figure 30 Security: 802.1x Only for Wireless Client
The following table describes the labels in this screen.
Table 18 Security: 802.1x Only for Wireless Client
LABEL
Security Settings
Profile Name
78
DESCRIPTION
Specify how often wireless stations have to resend user names and passwords in order
to stay connected.
Enter a time interval between 100 and 3600 seconds. Alternatively, enter "0" to turn
reauthentication off.
Note: If wireless station authentication is done using a RADIUS server, the
reauthentication timer on the RADIUS server has priority.
Select this option to have the NWA1121-NI automatically disconnect a wireless station
from the wired network after a period of inactivity. The wireless station needs to enter
the user name and password again before access to the wired network is allowed.
Enter a time interval between 100 and 3600 seconds.
Click Back to return to the previous screen.
Click Apply to save your changes.
Click Cancel to begin configuring this screen afresh.
DESCRIPTION
This is the name that identifying this profile.
NWA1121-NI User's Guide