Wps Screen - ZyXEL Communications NBG-417N - V1.0 Manual

7.8 WPS Screen

Use this screen to enable/disable WPS, view or generate a new PIN number and
check current WPS status. To open this screen, click Network > Wireless LAN >
WPS tab.
Figure 50 WPS
The following table describes the labels in this screen.
Table 31 WPS
LABEL
WPS Setup
Enable WPS
PIN Number
WPS Status
Status
Release
Configuration
Apply
Refresh
NBG-417N User's Guide
DESCRIPTION
Select this to enable the WPS feature.
This displays a PIN number last time system generated. Click Generate
to generate a new PIN number.
This displays Configured when the NBG-417N has connected to a
wireless network using WPS or when Enable WPS is selected and
wireless or wireless security settings have been changed. The current
wireless and wireless security settings also appear in the screen.
This displays Unconfigured if WPS is disabled and there are no
wireless or wireless security changes on the NBG-417N or you click
Release_Configuration to remove the configured wireless and
wireless security settings.
This button is only available when the WPS status displays Configured.
Click this button to remove all configured wireless and wireless security
settings for WPS connections on the NBG-417N.
Click Apply to save your changes back to the NBG-417N.
Click Refresh to get this screen information afresh.
Chapter 7 Wireless LAN
91