ZyXEL Communications NBG-417N - V1.0 Manual page 82

Chapter 7 Wireless LAN
In order to configure and enable WEP encryption; click Network > Wireless LAN
to display the General screen. Select Static WEP from the Security Mode list.
Figure 44 Network > Wireless LAN > General: Static WEP
The following table describes the wireless LAN security labels in this screen.
Table 26 Network > Wireless LAN > General: Static WEP
LABEL
WEP
Encryption
Authenticatio
n Method
ASCII
82
DESCRIPTION
Select 64-bit WEP or 128-bit WEP to enable data encryption.
This field is activated when you select 64-bit WEP or 128-bit WEP in the
WEP Encryption field.
Select Auto, Open System or Shared Key from the drop-down list box.
This field specifies whether the wireless clients have to provide the WEP
key to login to the wireless client. Keep this setting at Auto or Open
System unless you want to force a key verification before communication
between the wireless client and the ZyXEL Device occurs. Select Shared
Key to force the clients to provide the WEP key prior to communication.
Select this option in order to enter ASCII characters as WEP key.
NBG-417N User's Guide