Configuring Your Settings; Lan Settings - ZyXEL Communications NBG-417N - V1.0 Manual

Table 20 Screens Summary
LINK
Wireless
LAN
LAN
Maintenance
System
Logs
Tools
Sys OP
Mode
Language

5.4 Configuring Your Settings

5.4.1 LAN Settings

Use this section to configure your LAN settings while in AP Mode.
Click Network > LAN to see the screen below.
NBG-417N User's Guide
TAB FUNCTION
General Use this screen to configure wireless LAN.
MAC Filter Use the MAC filter screen to configure the NBG-417N to
block access to devices or block the devices from
accessing the NBG-417N.
Advanced This screen allows you to configure advanced wireless
settings.
QoS Use this screen to configure Wi-Fi Multimedia Quality of
Service (WMM QoS). WMM QoS allows you to prioritize
wireless traffic according to the delivery requirements of
individual services.
WPS Use this screen to configure WPS.
WPS Use this screen to add a wireless station using WPS.
Station
Scheduling Use this screen to schedule the times the Wireless LAN is
enabled.
IP Use this screen to configure LAN IP address and subnet
mask or to get the LAN IP address from a DHCP server.
General Use this screen to view and change administrative settings
such as system and domain names, password and
inactivity timer.
Time Use this screen to change your NBG-417N's time and date.
Setting
View Log Use this screen to view the logs for the categories that you
selected.
Firmware Use this screen to upload firmware to your NBG-417N.
Configuratio Use this screen to backup and restore the configuration or
n reset the factory defaults to your NBG-417N.
Restart This screen allows you to reboot the NBG-417N without
turning the power off.
General This screen allows you to select whether your device acts
as a Router or a Access Point.
This screen allows you to select the language you prefer.
Chapter 5 AP Mode
57