ZyXEL Communications NBG-417N - V1.0 Manual page 194

Chapter 22 Sys OP Mode
• The DHCP server on your device is disabled. In AP mode there must be a device
with a DHCP server on your network such as a router or gateway which can
allocate IP addresses.
The IP address of the device on the local network is set to 192.168.1.2.
The following table describes the labels in the General screen.
Table 63 Maintenance > Sys OP Mode > General
LABEL
System Operation Mode
Router
Access Point
Apply
Reset
Note: If you select the incorrect System Operation Mode you cannot connect to the
Internet.
194
DESCRIPTION
Select Router if your device routes traffic between a local network and
another network such as the Internet. This mode offers services such as a
firewall or content filter.
Select Access Point if your device bridges traffic between clients on the
same network.
Click Apply to save your settings.
Click Reset to return your settings to the default (Router)
NBG-417N User's Guide