Syslog Server Setup; Figure 156 Management > Syslog; Table 100 Management > Syslog - ZyXEL Communications MGS-3712 User Manual

Chapter 31 Syslog
Figure 156 Management > Syslog
The following table describes the labels in this screen.
Table 100 Management > Syslog
LABEL
Syslog
Logging Type
Active
Facility
Apply
Cancel

31.3 Syslog Server Setup

Click Management > Syslog > Syslog Server Setup to view the screen as shown next. Use
this screen to configure a list of external syslog servers.
258
DESCRIPTION
Select Active to turn on syslog (system logging) and then configure the syslog
setting
This column displays the names of the categories of logs that the device can
generate.
Select this option to set the device to generate logs for the corresponding
category.
The log facility allows you to send logs to different files in the syslog server.
Refer to the documentation of your syslog program for more details.
Click Apply to save your changes to the Switch's run-time memory. The Switch
loses these changes if it is turned off or loses power, so use the Save link on the
top navigation panel to save your changes to the non-volatile memory when you
are done configuring.
Click Cancel to begin configuring this screen afresh.
MGS-3712/MGS-3012F User's Guide