Introduction To Https; Https Example; Figure 148 Https Implementation - ZyXEL Communications MGS-3712 User Manual

Chapter 29 Access Control

29.7 Introduction to HTTPS

HTTPS (HyperText Transfer Protocol over Secure Socket Layer, or HTTP over SSL) is a web
protocol that encrypts and decrypts web pages. Secure Socket Layer (SSL) is an application-
level protocol that enables secure transactions of data by ensuring confidentiality (an
unauthorized party cannot read the transferred data), authentication (one party can identify the
other party) and data integrity (you know if data has been changed).
It relies upon certificates, public keys, and private keys.
HTTPS on the Switch is used so that you may securely access the Switch using the web
configurator. The SSL protocol specifies that the SSL server (the Switch) must always
authenticate itself to the SSL client (the computer which requests the HTTPS connection with
the Switch), whereas the SSL client only should authenticate itself when the SSL server
requires it to do so. Authenticating client certificates is optional and if selected means the SSL-
client must send the Switch a certificate. You must apply for a certificate for the browser from
a CA that is a trusted CA on the Switch.
Please refer to the following figure.
1 HTTPS connection requests from an SSL-aware web browser go to port 443 (by default)
on the Switch's WS (web server).
2 HTTP connection requests from a web browser go to port 80 (by default) on the Switch's
WS (web server).

Figure 148 HTTPS Implementation

If you disable HTTP in the Service Access Control screen, then the Switch
blocks all HTTP connection attempts.

29.8 HTTPS Example

If you haven't changed the default HTTPS port on the Switch, then in your browser enter
"https://Switch IP Address/" as the web site address where "Switch IP Address" is the IP
address or domain name of the Switch you wish to access.
250
MGS-3712/MGS-3012F User's Guide