Remote Management; Figure 153 Management > Access Control > Service Access Control; Table 96 Management > Access Control > Service Access Control - ZyXEL Communications MGS-3712 User Manual

Figure 153 Management > Access Control > Service Access Control
The following table describes the fields in this screen.
Table 96 Management > Access Control > Service Access Control
LABEL
Services
Active
Service Port
Timeout
Apply
Cancel

29.10 Remote Management

Click Management > Access Control > Remote Management to view the screen as shown
next.
You can specify a group of one or more "trusted computers" from which an administrator may
use a service to manage the Switch. Click Access Control to return to the Access Control
screen.
MGS-3712/MGS-3012F User's Guide
DESCRIPTION
Services you may use to access the Switch are listed here.
Select this option for the corresponding services that you want to allow to access the
Switch.
For Telnet, SSH, FTP, HTTP or HTTPS services, you may change the default service
port by typing the new port number in the Server Port field. If you change the default
port number then you will have to let people (who wish to use the service) know the
new port number for that service.
Type how many minutes a management session (via the web configurator) can be left
idle before the session times out. After it times out you have to log in with your
password again. Very long idle timeouts may have security risks.
Click Apply to save your changes to the Switch's run-time memory. The Switch loses
these changes if it is turned off or loses power, so use the Save link on the top
navigation panel to save your changes to the non-volatile memory when you are done
configuring.
Click Cancel to begin configuring this screen afresh.
Chapter 29 Access Control
253