Configure A Static Vlan; Figure 43 Advanced Application > Vlan > Static Vlan; Table 15 Advanced Application > Vlan > Vlan Detail - ZyXEL Communications MGS-3712 User Manual

The following table describes the labels in this screen.
Table 15 Advanced Application > VLAN > VLAN Detail
LABEL
VLAN Status
VID
Port Number
Elapsed Time
Status

8.5.3 Configure a Static VLAN

Use this screen to configure and view 802.1Q VLAN parameters for the Switch. See
8.1 on page 85
Static VLAN in the VLAN Status screen to display the screen as shown next.
Figure 43 Advanced Application > VLAN > Static VLAN
MGS-3712/MGS-3012F User's Guide
DESCRIPTION
Click this to go to the VLAN Status screen.
This is the VLAN identification number that was configured in the Static VLAN
screen.
This column displays the ports that are participating in a VLAN. A tagged port is
marked as T, an untagged port is marked as U and ports not participating in a VLAN
are marked as "–".
This field shows how long it has been since a normal VLAN was registered or a
static VLAN was set up.
This field shows how this VLAN was added to the Switch; dynamic - using GVRP,
static - added as a permanent entry or other - added in another way such as via
Multicast VLAN Registration (MVR).
for more information on static VLAN. To configure a static VLAN, click
Chapter 8 VLAN
Section
89