Change Your Password; Switch Lockout; Figure 17 Change Administrator Login Password - ZyXEL Communications GS-4024 User Manual

GS-4024 User's Guide
Table 5 Navigation Panel Links (continued)
LINK
VRRP
Management
Maintenance
Access Control
Diagnostic
Cluster
Management
MAC Table
IP Table
ARP Table
Routing Table

4.3.1 Change Your Password

After you log in for the first time, it is recommended you change the default administrator
password. Click Management, Access Control and then Logins to display the next screen.

Figure 17 Change Administrator Login Password

4.4 Switch Lockout

Note: You cannot log into the switch using the same administrator account
concurrently on different IP routing domains.
54
DESCRIPTION
This link takes you to screens where you can configure redundant virtual router for
your network.
This link takes you to screens where you can perform firmware and configuration
file maintenance as well as reboot the system.
This link takes you to screens where you can change the system login password
and configure SNMP and remote management.
This link takes you to screens where you can view system logs and test port(s).
This link takes you to a screen where you can configure clustering management
and view its status.
This link takes you to a screen where you can view the MAC addresses (and types)
of devices attached to what ports and VLAN IDs.
This link takes you to a screen where you can view the IP addresses (and types) of
devices attached to what ports and VLAN IDs.
This link takes you to a screen where you can view the MAC addresses – IP
address resolution table.
This link takes you to a screen where you can view the routing table in the switch.
Chapter 4 The Web Configurator