Ip Setup; Ip Interfaces - ZyXEL Communications GS-4024 User Manual

GS-4024 User's Guide
Table 10 Switch Setup (continued)
LABEL
Level 4
Level 3
Level 2
Level 1
Level 0
Apply
Cancel

7.7 IP Setup

Use the IP Setup screen to configure the default gateway device, the default domain name
server and add IP domains.

7.7.1 IP Interfaces

The switch needs an IP address for it to be managed over the network. The factory default IP
address is 192.168.1.1. The subnet mask specifies the network number portion of an IP
address. The factory default subnet mask is 255.255.255.0.
On the switch, as a layer-3 device, an IP address is not bound to any physical ports. Since each
IP address on the switch must be in a separate subnet, the configured IP address is also known
as IP interface (or routing domain). In addition, this allows routing between subnets based on
the IP address without additional routers.
You can configure multiple routing domains on the same VLAN as long as the IP address
ranges for the domains do not overlap. To change the IP address of the switch in a routing
domain, simply add a new routing domain entry with a different IP address in the same subnet.
76
DESCRIPTION
Typically used for controlled load, latency-sensitive traffic such as SNA (Systems
Network Architecture) transactions.
Typically used for "excellent effort" or better than best effort and would include
important business traffic that can tolerate some delay.
This is for "spare bandwidth".
This is typically used for non-critical "background" traffic such as bulk transfers that
are allowed but that should not affect other applications and users.
Typically used for best-effort traffic.
Click Apply to save the settings.
Click Cancel to reset the fields to your previous configuration.
Chapter 7 Basic Setting