Back To Factory Defaults; F/W Upload Screen; Figure 66 Configuration Upload Error; Figure 67 Reset Warning Message - ZyXEL Communications G-570U User Manual
Ieee 802.11a/b/g wireless access point/bridge
Hide thumbs
Also See for G-570U:
- Specifications (2 pages) ,
- Release note (2 pages) ,
- Declaration of conformity (1 page)
Table of Contents
Advertisement
Figure 66 Configuration Upload Error
7.4.3 Back to Factory Defaults
Clicking the RESET button in this section clears all user-entered configuration information
and returns the device to its factory defaults. The following warning screen will appear.
Figure 67 Reset Warning Message
You can also press the RESET button on the rear panel to reset the factory defaults of your
device. Refer to the section on resetting the device for more information on the RESET
button.
7.5 F/W Upload Screen
Find firmware at
.rmt extension, for example, "zyxel.rmt". The upload process uses HTTP (Hypertext Transfer
Protocol) and may take up to two minutes. After a successful upload, the system will reboot.
Click Management > F/W Upload to display the screen as shown. Follow the instructions in
this screen to upload firmware to your device.
Figure 68 Management: F/W Upload
Chapter 7 Management Screens
www.zyxel.com
in a file that (usually) uses the system model name with a
ZyXEL G-570U User's Guide
97
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
