Figure 42 Wireless Settings: Ap+Repeater; Table 14 Wireless Settings: Ap + Repeater - ZyXEL Communications G-570U User Manual

Figure 42 Wireless Settings: AP+Repeater

The following table describes the labels in this screen.

Table 14 Wireless Settings: AP + Repeater

LABEL
Operation Mode
SSID
Hide SSID
Channel
Chapter 6 Wireless Screens
DESCRIPTION
Select the operating mode from the drop-down list. The options are AP, Wireless
Client, Bridge and AP+Repeater.
Wireless stations associating to the access point (AP) must have the same SSID.
Enter a descriptive name (up to 32 printable characters) for the wireless LAN.
Spaces are allowed.
Note: If you are configuring the device from a computer connected
to the wireless LAN and you change the device's SSID,
channel or security settings, you will lose your wireless
connection when you click Apply to save your settings. You
must then change the wireless settings of your computer to
match the device's new settings.
Select this check box to hide the SSID in the outgoing beacon frame so a station
cannot obtain the SSID through scanning using a site survey tool.
Set the operating frequency/channel depending on your particular region.
Select a channel from the drop-down list box.
Refer to the chapter on wizard setup for more information about channels.
ZyXEL G-570U User's Guide
69