Wireless Client; G-570U In Wireless Client Mode; Figure 54 Example Wireless Client Otist Screen; Table 23 Otist - ZyXEL Communications G-570U User Manual

ZyXEL G-570U User's Guide
The following table describes the labels in this screen.

Table 23 OTIST

LABEL
OTIST Settings
Setup Key
Yes!
Start

6.16.1.2 Wireless Client

Start the ZyXEL utility and click the Adapter tab. Select the OTIST check box, enter the
same Setup Key as your AP's and click Save.

Figure 54 Example Wireless Client OTIST Screen

6.16.1.3 G-570U in Wireless Client Mode

If you are using the G-570U in Wireless Client mode, you can enable OTIST using either the
OTIST button or the web configurator.
88
DESCRIPTION
Enter the setup key of up to eight printable characters. The default OTIST setup
key is "01234567".
Note: If you change the OTIST setup key here, you must also make
the same change on the wireless client(s).
To have OTIST automatically generate a WPA-PSK key, select this check box. If
you manually configured a WEP key or a WPA-PSK key and you also select this
check box, then the key you manually configured is used.
Note: This option is not available in Wireless Client mode.
Click Start to encrypt the wireless security data using the setup key and have the
device set the wireless client to use the same wireless settings as the device. You
must also activate and start OTIST on the wireless client at the same time.
The process takes three minutes to complete.
Chapter 6 Wireless Screens