Dimension ES-3124PWR Ethernet Switch
Enables the device to discard incoming frames for VLANs that are not included in a port member set.
An example is shown next.
Enable ports one, three, four and five for configuration.
Enable ingress checking on the interface.
ras(config)# interface 1,3-5
ras(config-interface)# ingress-check
30.8.8
frame-type
Syntax:
frame-type <all|tagged>
where
<all|tagged>
An example is shown next.
Enable ports one, three, four and five for configuration.
Enable ingress checking on the interface.
Enable tagged frame-types on the interface.
ras(config)# interface 1,3-5
ras(config-interface)# ingress-check
ras(config-interface)# frame-type tagged
30.8.9
vlan-trunking
Syntax:
vlan-trunking
Enable VLAN Trunking on ports connected to other switches or routers (but not ports directly connected to end
users) to allow frames belonging to unknown VLAN groups to pass through the switch.
An example is shown next.
Enable ports one, three, four and five for configuration.
Enable VLAN Trunking on the interface.
30-14
Figure 30-26 ingress-check Command Example
Choose to accept both tagged and untagged incoming frames or just tagged
incoming frames on a port.
Figure 30-27 frame-type Command Example
Command Examples