Port Setup - ZyXEL Communications Dimension ES-3124PWR User Manual

Dimension ES-3124PWR Ethernet Switch
LABEL
In-band IP Addresses
You can create up to 128 IP addresses which are used to access and manage the switch from the ports belonging
to the pre-defined VLAN(s). You must configure a VLAN first.
IP Address Enter the IP address for managing the switch by the members of the VLAN specified in the VID
field below.
IP Subnet Mask Enter the IP subnet mask in dotted decimal notation.
VID Type the VLAN group identification number.
Default Gateway Enter the IP address of the default outgoing gateway in dotted decimal notation.
Manageable Select this option to allow the switch to be managed using this specified IP address.
Add Click Add to save the new rule to the switch. It then displays in the summary table at the bottom
of the screen.
Cancel Click Cancel to reset the fields to your previous configuration.
Index This field displays the index number of the rule. Click an index number to edit the rule.
IP Address This field displays the IP address.
IP Subnet Mask This field displays the subnet mask.
VID This field displays the ID number of the VLAN group.
Delete Check the rule(s) that you want to remove in the Delete column, then click the Delete button.
Cancel Click Cancel to clear the selected checkboxes in the Delete column.

6.8 Port Setup

Click Basic Setting and then Port Setup in the navigation panel to enter the port configuration screen. You may
configure any of the switch ports.
6-12
Table 6-4 IP Setup
DESCRIPTION
Basic Setting