Chapter 21 Vlan Stacking; Introduction; Vlan Stacking Example - ZyXEL Communications Dimension ES-3124PWR User Manual

Dimension ES-3124PWR Ethernet Switch
Chapter 21
VLAN Stacking
This chapter shows you how to configure VLAN stacking on your ES-3124PWR. See the chapter on
VLANs for more background information on Virtual LAN

21.1 Introduction

A service provider can use VLAN stacking to allow it to distinguish multiple customers VLANs, even those with
the same (customer-assigned) VLAN ID, within its network.
Use VLAN stacking to add an outer VLAN tag to the inner IEEE 802.1Q tagged frames that enter the network. By
tagging the tagged frames ("double-tagged" frames) , the service provider can manage up to 4,094 VLAN groups
with each group containing up to 4,094 customer VLANs. This allows a service provider to provide different
service, based on specific VLANs, for many different customers.
A service provider's customers may require a range of VLANs to handle multiple applications. A service provider's
customers can assign their own inner VLAN tags on ports for these applications. The service provider can assign an
outer VLAN tag for each customer. Therefore, there is no VLAN tag overlap among customers, so traffic from
different customers is kept separate.
21.1.1

VLAN Stacking Example

In the following example figure, both A and B are Service Provider's Network (SPN) customers with VPN tunnels
between their head offices and branch offices respectively. Both have an identical VLAN tag for their VLAN group.
The service provider can separate these two VLANs within its network by adding tag 37 to distinguish customer A
and tag 48 to distinguish customer B at edge device 1 and then stripping those tags at edge device 2 as the data
frames leave the network.
VLAN Stacking 21-1