Config-Vlan Commands; Table 29-4 Command Summary: Config-Vlan Commands - ZyXEL Communications Dimension ES-3124PWR User Manual

mibtrap
29.9.4

config-vlan Commands

The following table lists the config-vlan commands in configuration mode.
vlan <1-4094>
name <name-str>
normal <port-list>
fixed <port-list>
forbidden <port-
list>
untagged <port-
list>
inactive
help
no
exit
Introducing the Commands
Table 29-3 Command Summary: Configure Mode
COMMAND

Table 29-4 Command Summary: config-vlan Commands

COMMAND
Dimension ES-3124PWR Ethernet Switch
fixed <port-
list>
forbidden <port-
list>
untagged <port-
list>
inactive
ip address
inband-default
dhcp-bootp
ip address
default-gateway
ip address <ip-
address> <mask>
DESCRIPTION
Enables sending of PoE MIB traps.
DESCRIPTION
Creates a new VLAN group.
Specifies a name for identification
purposes.
Specifies the port(s) to dynamically join
this VLAN group using GVRP
Specifies the port(s) to be a permanent
member of this VLAN group.
Specifies the port(s) you want to prohibit
from joining this VLAN group.
Specifies the port(s) you don't want to
tag all outgoing frames transmitted with
this VLAN Group ID.
Disables the specified VLAN.
Displays a list of available VLAN
commands.
Sets fixed port(s) to normal port(s).
Sets forbidden port(s) to normal port(s).
Specifies the port(s) you want to tag all
outgoing frames transmitted with this
VLAN Group ID.
Enables the specified VLAN.
Sets the default in-band interface to use
a static IP address in this VLAN.
The switch will use the default IP
address of 0.0.0.0 if you do not
configure a static IP address.
Deletes the default gateway from this
VLAN.
Deletes the IP address and subnet
mask from this VLAN.
Leaves config-vlan mode.
29-21