Dimension ES-2008 Ethernet Switch
Click Administrator and then User Authentication to display the screen shown next.
Follow the instructions in the next table to set the fields in this screen.
FIELD
User name
Assign/Change
Password
Reconfirm
password
4.3
Resetting the Switch
Restoring to factory defaults resets the switch's parameters. The user name will be reset to
"admin", the password to "1234" and the LAN IP address to 192.168.1.1.
This function erases the current configuration before restoring a
previous back up configuration; please do not attempt to restore
unless you have a backup configuration file stored on disk.
Follow the steps to restore your switch back to factory defaults.
Step 1.
Click Factory Default to display the screen shown next.
Step 2.
Click the Factory Default button and wait until the switch finishes rebooting
before accessing the switch again.
4-2
Figure 4-2 User Authentication
Table 4-2 User Authentication
Type in your new switch system user name.
Type in your new switch system password.
Re-type your new switch system password for confirmation.
Figure 4-3 Factory Default
DESCRIPTION
Basic Switch Configuration