Dimension ES-2008 Ethernet Switch
actions->
Tab=Next Item
To move to the configuration menu, press [TAB] to select <Edit> in the actions menu and
press [ENTER]. The following table describes the fields in this screen.
FIELD
IP address
Enter the (LAN) IP address for the switch in dotted
decimal notation.
Subnet mask
Enter the subnet mask in dotted decimal notation. Refer
to the Subnetting appendix to calculate a subnet mask if
you are implementing subnetting.
Gateway
Enter the LAN gateway IP address in dotted decimal
notation.
Press [ESC] to move the cursor back to the actions menu. Press [TAB] to select <Save>
and press [ENTER] to save the settings back to the switch.
14.2.3 Changing the System User Name
Follow the steps to change the default system user name.
Step 1.
In the Administration Configuration screen, press [TAB] to select User
Name Configuration and press [ENTER].
Step 2.
To move to the configuration menu, press [TAB] to select <Edit> in the
actions menu and press [ENTER].
Step 3.
Type in your new system user name in the User Name field.
14-4
Dimension Switch ES-2008 : IP Configuration
========================
IP Address
Subnet Mask : 255.255.255.0
Gateway
<Edit>
Select the action menu.
BackSpace=Previous Item
Figure 14-4 SMT: IP Configuration
Table 14-3 SMT: IP Configuration
DESCRIPTION
: 192.168.1.1
: 192.168.1.10
<Save>
CTRL+A=Action menu
<Quit>
Enter=Select Item
EXAMPLE
192.168.1.1
255.255.255.0
192.168.1.10
Basic System Setup