LED
COLOR
2.3.4 The Gigabit Port
The gigabit port module is capable of transferring data at a speed up to 1000 mbps. The
gigabit port is not available on all switch models.
The following table describes the gigabit port LEDs.
LED
COLOR
1000
Green
LK/ACT
Orange
FD/COL
Orange
2.4
Rear Panel
The console port and the power socket are located on the rear panel as shown in the next
figure.
Hardware Description and Installation
Table 2-4 100FX Module LED Descriptions
STATUS
Off
No device is attached or the port is operating in half-
duplex mode
Table 2-5 Gigabit Module LED Descriptions
STATUS
On
The port is connected at 1000 Mbps.
Off
The port is not connected at 1000 Mbps.
On
The fiber port is connected to an Ethernet device.
Blinking
This fiber port is transmitting data.
Off
No data is being transmitted.
On
The port is operating in full-duplex mode.
Blinking
Packet collision is occurring on this port.
Off
No device is attached or the port is operating in half-
duplex mode
Figure 2-5 Rear Panel
Dimension ES-2008 Ethernet Switch
DESCRIPTION
DESCRIPTION
2-5