ZyXEL Communications Dimension ES-2008 User Manual page 144

Dimension ES-2008 Ethernet Switch
If you need the adapter:
a. In the Network window, click Add.
b. Select Adapter and then click Add.
c. Select the manufacturer and model of your network adapter and then click OK.
If you need TCP/IP:
a. In the Network window, click Add.
b. Select Protocol and then click Add.
c. Select Microsoft from the list of manufacturers.
Select TCP/IP from the list of network protocols and then click OK.
d.
If you need Client for Microsoft Networks:
a. Click Add.
b. Select Client and then click Add.
c. Select Microsoft from the list of manufacturers.
d. Select Client for Microsoft Networks from the list of network clients and then
click OK.
e. Restart your computer so the changes you made take effect.
In the Network window Configuration tab, select your network adapter's TCP/IP entry
and click Properties.
1. Click the IP Address tab.
-If your IP address is dynamic, select Obtain
an IP address automatically.
-If you have a static IP address, select Specify
an IP address and type your information into
the IP Address and Subnet Mask fields.
B
Configuring
Setting Up Your Computer's IP Address