Figure 16-2 Smt: Stp Configuration; Figure 16-3 Smt: Enable Stp - ZyXEL Communications Dimension ES-2008 User Manual

Dimension ES-2008 Ethernet Switch
Tab=Next Item
16.2.1 Enable STP
To enable STP, select Enable/Disable STP Function in the STP Configuration screen
and press [ENTER] to display the screen as shown next.
Press [SPACE BAR] and [ENTER] to select Enable in the STP field and save the
settings.
actions->
Tab=Next Item
16.2.2 Configure System Parameters
Use the STP Parameters Setup screen to configure the system parameters for STP. Refer
to the Configuring Spanning Tree Parameters section for field descriptions.
16-2
Dimension Switch ES-2008 : STP Configuration
========================
Enable/Disable STP Function
STP Parameters Setup
STP Per Port Setting
Previous Menu
Enable or disable the Spanning Tree Protocol.
BackSpace=Previous Item

Figure 16-2 SMT: STP Configuration

Dimension Switch ES-2008 : Enable/Disable STP Function
========================
STP :Enabled
<Edit>
Select the action menu.
BackSpace=Previous Item

Figure 16-3 SMT: Enable STP

Enter=Select Item
<Save>
Space=Toggle
Protocol Related Configuration
<Quit>
Esc=Action menu