ZyXEL Communications Dimension ES-2008 User Manual page 148

Dimension ES-2008 Ethernet Switch
6 -If you do not know your gateway's
. IP address, remove any previously
installed gateways in the IP Settings
tab and click OK.
Do one or more of the following if
you want to configure additional IP
addresses:
-In the IP Settings tab, in IP
addresses, click Add.
-In TCP/IP Address, type an IP
address in IP address and a subnet
mask in Subnet mask, and then
click Add.
-Repeat the above two steps for
each IP address you want to add.
-Configure additional default
gateways in the IP Settings tab by
clicking Add in Default gateways.
-In TCP/IP Gateway Address, type
the IP address of the default
gateway in Gateway. To manually
configure a default metric (the
number of transmission hops), clear
the Automatic metric check box
and type a metric in Metric.
-Click Add.
-Repeat the previous three steps for each default gateway you want to add.
-Click OK when finished.
F Setting Up Your Computer's IP Address