AKG PR 40 User Instructions page 15

3.3 Using Rechargeable Batteries
(Fig. 4)
Fig. 4: Using the optional CU 40 charger.
Instead of dry batteries, you can also
use two 1.5 V rechargeable batteries to
power the receiver. We recommend
SANYO HR-4U (650 mAh) or Panasonic
Rechargeable PRO+ (550 mAh) NiMH
rechargeable batteries.
To charge the batteries, insert the receiv-
er (1) into the optional CU 40 charger (2)
as shown in fig. 4.
Important: Before placing the receiver
in the charger, switch the receiver
OFF and fold the antennas all the
way down, against the side panels
of the receiver. With the antennas
folded down, it will be easier to
center the receiver inside the char-
ging compartment and the charger
will be less prone to be knocked
over.
For details on charging batteries, refer to
the CU 40 charger manual.
4 Applications
4.1 Mounting the Receiver
on a Mixer, Pedalboard, or
Video Camera
1. Press the ends of the belt clip inward
as shown in fig. 5 and remove the
belt clip.
2. Cut two 2-inch lengths off the sup-
plied Velcro strip.
3. Remove the backing from one of the
Fig. 5: Removing the belt clip.
15