Monochrome; Film Mode (3:2 Pull-Down); I/P Setting; Film Mode - Sharp AQUOS LC-26GA4U Operation Manual

Basic adjustment settings

Monochrome

For viewing a video in monochrome.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Picture".
3
Press a/b to select "Advanced", and then
press ENTER.
4
Press a/b to select "Monochrome", and
then press ENTER.
C. M. S-Hue
C. M. S-Saturation
C. M. S-Value
Color Temp.
Black
3D-Y/C

Monochrome

Film Mode

I/P Setting

5
Press c/d to select "On", and then press
ENTER.
Selected item
Off Normal color
On
For viewing in monochrome

Film Mode (3:2 pull-down)

Automatically detects a film-based source (originally
encoded at 24 frames/second), analyzes it then
recreates each still film frame for high-definition picture
quality.
1
Repeat steps 1 to 3 in Monochrome.
2
Press a/b to select "Film Mode", and then
press ENTER.
3 Press c/d to select "On", and then press
ENTER.
Selected item
Off Normal viewing mode
On
Detects, analyzes, converts film source
On Off
Description
Description

I/P Setting

Adjusting the image and input signal can give you a
more beautiful picture.
1
Repeat steps 1 to 3 in Monochrome.
2 Press a/b to select "I/P Setting", and then
press ENTER.
3
Press c/d to select "Interlace" or
"Progressive", and then press ENTER.
NOTE
• I/P Setting is set to Progressive when Film Mode is "On".
• "I/P Setting" is not selectable when channel display shows
an input resolution of 480P, 720P or 1080I.
31