Other viewing options
Twin picture functions
Allows you to display two pictures on the screen at
one time.
Twin picture in all cases
You can display two same-sized pictures except when
inputting from INPUT 4 (HDMI) and INPUT 5 (DVI-I)
terminals and CARD.
1
Press TWIN PICTURE.
• Twin picture displays and a selected input
source image displays.
2
Press SELECT to set either screen to be
active.
• "z" displays on the active screen, which has
sound output.
3
Press TWIN PICTURE to exit twin picture.
NOTE
• This function does not work under the following input
conditions:
1 INPUT 4 (HDMI),
2 INPUT 5 (DVI-I),
3 CARD,
4 Two pictures from the same source (e.g. INPUT 1 and
INPUT 1),
5 An image will appear on the right side only if it is a
480i signal.
* An SDTV image has a 480p signal, so it will not appear
either.
• When this function is not available, "No dual screen display
available" will display.
• Pressing ANT-A/B while viewing in Twin Picture mode (TV
image and video image) with TV selected will display the
TV image of the other tuner.
• A message "Cannot switch screens" will appear.
Picture and still image
You can display two same-sized pictures – one moving
and one still.
1
Press FREEZE.
• A moving image displays on the left screen and
a still image displays on the right screen. The
still image is one frame captured from a moving
image at the moment you press FREEZE.
2
Update the still image by pressing ENTER.
• Each time you press ENTER, the image on the
right screen updates.
• If a PC card with enough capacity is inserted
in the card slot, a message will appear on the
screen asking you whether to save the image.
Press REC on the remote control if you want to
save.
3
Press FREEZE to exit still image.
NOTE
• This function does not work in INPUT 4 (HDMI), INPUT 5
(DVI-I) and CARD.
• When this function is not available, "No still image display
available." will display.
• Another image can be saved if a PC card with enough
capacity is inserted in the card slot.
• The still image automatically goes out after 30 minutes.
• If you are using FREEZE and a broadcast activates the V-
CHIP BLOCK, FREEZE will cancel and a block message
will appear.
FREEZE
73