3D-Y/C; Monochrome; Film Mode; Film Mode - Sharp LC-26GA5X Operation Manual

Basic adjustment settings

3D-Y/C

Provides high quality images with minimal dot crawl
and cross colour noise.
Using 3D-Y/C on the remote control unit
Press 3D-Y/C to switch the 3D-Y/C function on and
off.
Using 3D-Y/C on the menu screen
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Picture".
3
Press a/b to select "Advanced", and then
press ENTER.
4
Press a/b to select "3D-Y/C", and then
press ENTER.
C. M. S. – Hue
C. M. S. – Saturation
C. M. S. – Value
Colour Temp.
Black
3D – Y/C

Monochrome

Film Mode

I/P Setting

5
Press a/b to select the desired level, and
then press ENTER.
Selected item
Standard Normal adjustment
Fast
For movie image
Slow
For still image
NOTE
• "3D-Y/C" is not selectable depending on the input signal
type.
• "3D-Y/C" is set to "On" when the TV is turned back on.
• 3D-Y/C may not operate depending on the input signal
type or noisy input signal.
Standard
Fast
Slow
Description

Monochrome

For viewing a video in monochrome.
1
Repeat steps 1 to 3 in 3D-Y/C.
2
Press a/b to select "Monochrome", and
then press ENTER.
3
Press c/d to select "On", and then press
ENTER.

Film mode

Automatically detects a film-based source (originally
encoded at 24/25 frames/second, depending on the
vertical frequency), analyses it then recreates each
still film frame for high-definition picture quality.
1
Repeat steps 1 to 3 in 3D-Y/C.
2
Press a/b to select "Film Mode", and then
press ENTER.
3
Press c/d to select "On", and then press
ENTER.

I/P setting

Adjusting the image and input signal can give you a
more beautiful picture.
1
Repeat steps 1 to 3 in 3D-Y/C.
2
Press a/b to select "I/P Setting", and then
press ENTER.
3
Press c/d to select "Interlace" or
"Progressive", and then press ENTER.
NOTE
• The picture is progressive scan when Film Mode is "On".
27