Sharp AQUOS LC-26GA4U Operation Manual page 77

Other viewing options
1
2
1
2
76
Cable control buttons
When the FUNCTION is set to CBL/SAT the cable
converter connected to the Display can operate using
1 to 4.
1
2
3
3
4
4
* Some manufacturers do not preset FLASHBACK.
• CABLE and SAT cannot be selected at the same time.
SAT control buttons
1
2
3
• CABLE and SAT cannot be selected at the same time.
3
SOURCE POWER
Turns the cable converter power on and off.
0 – 9
Press a button (or buttons) that corresponds to the
channel that you wish to watch.
FLASHBACK *
Press to switch between the current channel and the
channel you were watching immediately before.
CH a/b
Press CH a or CH b to tune in a higher or lower
channel.
NOTE
SOURCE POWER
Turns the Satellite broadcast tuner power on and off.
•
0 – 9, (DOT)
Press a button (or buttons) that corresponds to the
channel that you wish to watch.
ENTER, a/b/c/d
ENTER: Press to activate the selected function.
a/b/c/d: Press the button to select items on the SAT
GUIDE screen or SAT MENU screen.
NOTE