Advanced Picture Adjustments; Color Temperature; Black; 3D-Y/C - Sharp Aquos LC-37D40U Operation Manual

Basic adjustment settings

Advanced picture adjustments

This TV provides various advanced functions for
optimizing the picture quality.
Press MENU and the MENU screen displays.
1
Press c / d to select "Picture".
2
Press a / b to select "Advanced", and then
3
press ENTER.
Press a / b to select a specific adjustment
4
item, and then press ENTER.
• You can select "Color Temp.", "Black", "3D-Y/
C", "Monochrome", "Film Mode" or "Range of
OPC".
Press a / b (or c / d ) to select the desired
5
parameter.
• See the table for the selectable parameters.
Press MENU to exit.
6

Color Temperature

For a better white balance, use color temperature
correction.
Selected item
High
Mid-High
Middle
Mid-Low
Low

Black

Changes the viewing depth by automatically adjusting
the dark portion of an image for easier viewing.
Selected item
Off No adjustment
On For high detail in black portions
24
Description
White with Bluish tone
White with Reddish tone
Description

3D-Y/C

Provides high quality images with minimal dot crawl
and cross color noise.
Selected item
Standard Normal adjustment
Fast For moving images
Slow For still images
NOTE
• 3D-Y/C is available for input signal from Composite Video
and ANALOG IN.

Monochrome

For viewing a video in monochrome.
Selected item
Off Normal color
On For viewing in monochrome

Film Mode (3:2 pull-down)

Automatically detects a film-based source (originally
encoded at 24 frames/second), analyzes it then
recreates each still film frame for high-definition picture
quality.
Selected item
Off Normal viewing mode
Detects, analyzes, converts film
On
source

Range of OPC

The brightness level range of the OPC sensor's
automatic adjustments can be set according to your
preferences. The adjustment range of the OPC sensor
can be set to a maximum of e 16 and a minimum of
f 16.
Selected item
Max. f 15 through e 16
Min. f 16 through e 15
NOTE
• The range of OPC can only be adjusted when the OPC is
set to On.
• The maximum setting cannot be set to a smaller number
than the minimum setting.
• The minimum setting cannot be set to a bigger number
than the maximum setting.
• Depending on the brightness of the surrounding light, the
OPC sensor might not operate if the adjustment range is
small.
Description
Description
Description
Description