Advanced Picture Settings; Color Temperature; Film Mode; 3D-Y/C - Sharp LC-19SB15U, LC-19SB25U, LC-19SB25U-W Operation Manual

Basic adjustment settings

Advanced picture settings

Advanced setting enables you to set the picture
adjustment in more detail. There are four options you
can choose from.
C.M.S. (Color Management System)
Color tone is managed using the six-color adjustment
setting.
Press MENU and the MENU screen displays.
1
Press c / d to select "Picture".
2
Press a / b to select "Advanced", and then
3
press ENTER.
Press a / b to select a specific adjustment
4
item among "C.M.S.-Hue", "C.M.S.-Saturation"
and "C.M.S.-Value", and then press ENTER.
C. M. S. – Hue
C. M. S. – Saturation R
C. M. S. – Value Y

Color Temp.

G

Film Mode

C
3D - Y/C B
M

Monochrome

Reset

I/P Setting

Press c / d to adjust the item to your desired
5
position.
• For resetting all adjustment items to factory preset values,
a / b
"Reset"
press to select
Selected item
C.M.S-Hue This is a standard to adjust the color
either more reddish or more bluish in tone.
C.M.S- Increases or decreases the saturation of a
Saturation selected color
C.M.S-Value A higher value makes the image brighter.
A lower value makes the image darker

Color Temperature

For a better white balance, use color temperature
correction.
Selected item
High White with Bluish tone
Mid-High
Middle
Mid-Low
Low White with Reddish tone
This manual downloaded from http://www.manualowl.com
[ 0] – +
[ 0] – +
+
[ 0] –
[ 0] – +
[ 0] – +
[ 0] – +
ENTER.
, and then press
Description
Description

Film Mode

Automatically detects a fi lm-based source (originally
encoded at 24/25 frames/second, depending on the
vertical frequency), analyzes it then recreates each still
fi lm frame for high-defi nition picture quality.
Selected item
On Detects, analyzes, converts fi lm source
Off Normal viewing mode

3D-Y/C

Provides high quality images with minimal dot crawl
and cross color noise.
Selected item
Standard Normal adjustment
Fast For movie image
Slow For still image
Off For Game Mode
• 3D-Y/C is not selectable depending on the input signal
type.
• 3D-Y/C may not operate depending on the input signal
type or noisy input signal.

Monochrome

For viewing a video in monochrome.
Selected item
On For viewing in monochrome
Off Normal color

I/P Setting

Adjusting the image and input signal can give you a
more beautiful picture.
Press MENU to display the MENU screen, and
1
then press c / d to select "Picture".
Press a / b to select "Advanced", and then
2
press ENTER.
Press a / b to select "I/P Setting", and then
3
press ENTER.
Press a / b to select "Fast" or "Slow", and
4
then press ENTER.
Selected item
Fast Suitable for fast-moving images
Slow Suitable for smooth images with low
amounts of fl ickers
Description
Description
Description
Description
27