Sharp AQUOS LC-26GA4U Operation Manual page 14

Part names
Display
INPUT 3 terminals
INPUT 1 terminals
SYSTEM RESET**
DC OUTPUT
terminal
(Terminal for expanded
functionality in the near future.)
* Press RESET if the TV cannot return to its original state after performing various operations.
• AV MODE resets to DYNAMIC (Fixed)
• TV channel returns to initial channel setting (Air:2ch, Cable:1 or 2ch)
• Twin picture resets to normal
• Audio setting initializes
• Dolby virtual resets to Off
• Image position initializes
** Press SYSTEM RESET if the TV does not operate after starting up.
NOTE
• Pressing RESET will not work if the TV is in standby mode (indicator lights red).
• Pressing RESET will not delete channel preset or secret number. See page 66 for clearing the secret number when you
know it. See page 84 for initializing to the factory preset values when you forget your secret number.
MONITOR OUTPUT terminals
INPUT 2 terminals
INPUT 5 terminals
SPEAKER terminals
CENTER CHANNEL
INPUT terminal
Antenna (A) input terminal
Antenna (A) output terminal
RS-232C
terminal
RESET*
AC INPUT
terminal
INPUT 4 terminal
Antenna (B) input terminal
13